B’S MOTO LAB BASIC SERVICES


B’S MOTO LAB BRAKE SERVICES

BRAKE PAD REPLACEMENT

Brake pad or shoe replacement includes replacement of the pads or shoes, inspection of the entire brake system, proper cable adjustment, and topping off the fluid level.

Starting at $16.25 Plus Parts

BRAKE FLUID REPLACEMENT

Brake fluid replacement will remove the old weak fluid from the system and get replaced with a higher grade fluid that is better then the original fluid that comes from the factory. They will then be properly bled to achieve the highest amount of braking power. Once the fluid replacement is completed the entire brake system will be inspected for any other signs of wear.

Starting at $16.25 Plus Parts

BRAKE COMPONENT REPLACEMENT

B’s Moto Lab can replace the broken lever, cable, hydraulic line, master cylinder, rotor, or caliper. Once the broken part is replaced the system will then be bled properly and inspected for any other signs of wear. BML can even rebuild the master cylinder to help save you some cost on a whole new unit.

Starting at $16.25 Plus Parts


B’S MOTO LAB CARBURETOR SERVICES

CARBURETOR CLEANING

The carburetor will be removed from the bike and laid on the bench to perform this service to ensure that there isn’t any dirt or cleaning solution that will get into the engine. The carburetor will then be completely disassembled, inspected, cleaned, and then assembled with the exact same settings that the carburetor had before disassembly.

Carburetor off bike starting at $48.75

Carburetor on bike starting at $97.50

CARBURETOR ADJUSTMENT

Whether you’re going up to the mountains, down to the beach, or you just invested some money into performance products, B’s Moto Lab can adjust the carburetor on your bike to make it run good.

Carburetor off bike starting at $48.75 Plus Parts

Carburetor on bike starting at $97.50 Plus Parts

CARBURETOR REBUILD

B’s Moto Lab will completely rebuild the carburetor and give it all new jets, screws, needles, seats, springs, hoses, and screws. Once the old parts are removed, the carburetor will be professionally cleaned to ensure that there isn’t any dirt inside once the new parts are installed.

Carburetor off bike starting at $48.75 Plus Parts

Carburetor on bike starting at $113.75 Plus Parts


B’S MOTO LAB CHASSIS SERVICES

CHASSIS STEERING HEAD

Steering head service includes a complete disassembly of the front end to grease the top and bottom steering stem bearings. Every part will then be inspected and assembled to O.E.M. specifications. It’s recommended that this service is performed every 6 races or 15 hours.

Starting at $130 Plus Parts

CHASSIS SWINGARM LINKAGE

Swing arm linkage service not only includes greasing of the linkage, but the swing arm pivot point, the upper and lower shock bolts, and the axle bolt. This service will help extend the life of all your rear end bearings and is recommended every 3 races or 7 hours.

Starting at $97.50 Plus Parts


B’S MOTO LAB CLUTCH SERVICES

CLUTCH ADJUSTMENT

Clutch adjustment includes properly adjusting the manual or automatic clutch on the bike. We also remove the clutch cable and lubricate it.

Starting at $18.00

CLUTCH COMPONENT REPLACEMENT

BML can professionally replace any clutch component including the clutch lever, cable, actuating rod, cover gasket, friction plates, steel plates, pressure plate, basket, hub, and springs. New friction plates are soaked in new oil for more then 24 hours before they get installed. Anytime the pressure plate is removed the clutch springs and other internal clutch components will be properly inspected and lubricated.

Starting at $18.00


B’S MOTO LAB DRIVE SERVICES

DRIVE ADJUSTMENT

Chain adjustment includes inspection of the chain, correct adjustment, and lubrication of the drive chain on any bike. Also, if the bike doesn’t have any more adjustment, bring in the chain to get some links professionally removed.

Starting at $16.25

DRIVE CLEANING

Cleaning includes removing the drive chain and removing all the old dirt and foreign material with solvent and a wire brush. The chain will then be air dried and inspected for wear, installed, adjusted, and properly lubed to help extended the life of the chain. O-ring chains will only be scrubbed down with a wire brush and will not get cleaned in solvent.

Starting at $30.00

DRIVE COMPONENT REPLACEMENT

If you have a worn out chain, sprocket, chain guide, or stripped out sprocket bolts, we will replace it for you. It is best to replace the chain and both sprockets together since they wear together, you will get a longer life out of both if they are replaced as a set.

Starting at $16.25 


B’S MOTO LAB ELECTRICAL SERVICES

ELECTRICAL TROUBLESHOOT

Electrical troubleshooting has a flat rate time of one hour and whether your bike is missing out, won’t start, or simply won’t do a thing, BML will get it diagnosed for you.

$65

ELECTRICAL REPAIR

We can fix your open, short, or unwanted ground professionally, with the right tools, and supplies. Once the repair is fixed the wire will be wrapped with heat shrink to give it the good clean look unlike the look of black tape, or even worse, duct tape.

Starting at $32.50.00 Plus Parts

ELECTRICAL COMPONENT REPLACE

We can replace any electrical component of the bike to give it the latest look or performance enhancement.
Call for pricing


B’S MOTO LAB GRAPHICS SERVICES

GRAPHICS APPLICATION

Are you that person that is terrible at installing graphics and always get bubbles? Graphic application includes the removal of the old stickers and residue, inspection and cleaning of the plastic, and professional instillation of the new graphics to get the exceptional look that you are looking for.

Starting at $32.50 Plus parts

CUSTOM GRAPHICS

Get a full set of B’s Moto Lab graphics for your bike and receive a 20% discount off labor. We have sets already designed for your Cobra, Honda, Yamaha, Kawasaki, Suzuki, or KTM.

Call for pricing


B’S MOTO LAB WHEELS & TIRE SERVICES

WHEEL LACING AND TRUING

Whether you just got a new rim and need it laced up to your old hub, broke a couple spokes and need them replaced, or simply need the wobble taken out of your wheel, we can get it done. We true all wheels to within .020″ laterally and radially.

Starting at $65 Plus Parts

WHEEL BEARING REPLACEMENT

Bearing replacement includes disassembly of the inner hub to inspect the bushing and inner hub as well as a runout check of your axle. The hub will then be replaced with the new bearings and seals of your choice.

Starting at $65 Plus Parts

TIRE SERVICES

Once the tire has been removed the rim strip will be taken off to clean out any dirt or foreign material that has made its way inside the tire through the spoke nipples. The technician will then inspect the inner parts for wear or interference and assemble the tire back onto the wheel with a new tube and set it to the specified tire pressure.

Starting at $16.25 Plus Parts